THE FINISHED PRODUCT
After several hundred hours of painstaking work - behold! The finished product! Ready to be shipped
Click the photo to enlarge. (Best viewed on a computer or tablet)
Jeff's first-ever WWI propeller he made - for an Avro 504k airplane. Note the brass edging (still with masking tape on too, this was removed before delivering to client)
Jeff's first-ever WWI prop, for an Avro 504k airplane. Made in the mid 1990's
An original BE2d prop
Old and new props
Checking laminations for balance
9 foot BE2d propeller
BE2d propeller
BE2d propeller
Propeller for a 100hp Gnome rotary engine
Jeff with his prop for 100hp Gnome rotary engine
SE5a prop
Jeff with his Sopwith Camel prop
Jeff with a paint-finished Tiger Moth
A finished DR1/8 prop
Prop for a Bantam (BE2 prop in background)
An original and newly made (on right) DH4/ Liberty V12 400hp prop
Left to right: Rotax prop, clear-finished Tiger Moth, and Morane Saulnier Type N
Close-up of the hub on Morane Saulnier prop
Morane Saulnier prop
Another view of the Morane Saulnier
Unusual shape of the Morane Saulnier
Completed Morane Saulnier
Finished Tiger Moth with brasswork
Jeff with BE2 prop
BE2 propeller
Tiger Moth prop with linen and brass
Finished Tiger Moth with linen and brass clear finish
One of Jeff's grandsons holding the DH4 prop
Trial prop for an 80hp Gnome rotary engine
Three Sopwith Scout props
Fokker DR1/D8 prop
Sopwith Pup (left) and Eindecker prop (right)
Jeff with a Sopwith Camel prop that he restored for a client - this propeller saw action in WWI - for the full story on it, see our "Publicity" page
(On bottom) an original Sopwith triplane prop, with the new linened prop on top
Sopwith Camel
Tiger Moth prop for Croydon Aircraft Company in Gore. Clear finish with brass with Perfectus NZ transfer fitted
Three Fokker triplane replica props (Warner Scarab motors)
Tiger Moth prop with brass work
Tiger Moth prop with brass fitted to one blade, still to come on other blade
Transporting 2x BE2 props
Test prop for CAMS (for Sopwith Camel). Photo courtesy of CAMS
A beaut for a Fokker DR1
Jeff with his beautiful prop for a Sopwith 1 & 1/2 strutter. In a jig ready for dispatch
The stampings on the prop for a Sopwith 1 & 1/2 strutter - same prop in the previous photo
CLICK HERE TO GO BACK TO THE MAIN GALLERY TO VIEW EVEN MORE PHOTOS!